Bafang DP C240.CAN
The Bafang DP C240.CAN is an e-bike display with USB charging at 5 V at 500 mA, storage from -20℃~50℃, a humidity range of 30%-70% RH, an operating range of -20℃~45℃ and an ingress rating of IP65.
Last updated: 6 September 2026
What we found
- Published as DP C240.CAN · IP65 · -20℃~45℃.
- 7 specifications are published for it, each with the source it was read from, 1 of them corroborated by a second source.
- No matching recall was found in the records this catalogue holds from 8 regulators.
Assembled from the evidence on this page. Every figure and count below is shown with the source it was read from.
Battery and charging
- USB charging
- 5 V at 500 mA
“USB charging (5V and 500mA)”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP C240-EN.pdf
Source: bafang-e.com/uploaded/manual/BF-DM-C-DP C240-EN.pdf
Frame and components
- Storage temperature
- -20℃~50℃
- Humidity range Bafang give
- 30%-70% RH
- Ingress protection
- IP65
- Operating temperature
- -20℃~45℃
“Storage temperature: -20℃~50℃”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP C240-EN.pdf
“Storage room Humidity: 30%-70% RH”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP C240-EN.pdf
“Waterproof: IP65”
Source: bafang-e.com/uploaded/manual/BF-DM-C-DP C240-EN.pdf
“Operating temperature: -20℃~45℃”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP C240-EN.pdf
Identity
- Model name as declared
- DP C240.CAN
“Model: DP C240.CAN”
Source: bafang-e.com/uploaded/manual/BF-DM-C-DP C240-EN.pdf
Error codes
- Error code table it publishes
- Bafang's 31-code system table
“ERROR CODE DEFINITION The HMI can show the faults of Pedelec. When a fault is detected, the icon will be indicated and one of the following error codes will be indicated too.”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP C240-EN.pdf
Models documented with this display
No model has been matched to this display yet in the records we hold. That is a statement about our research, not about which bikes carry it.