Bafang DP E180.CAN
The Bafang DP E180.CAN is an e-bike display with storage from -20℃~60℃, a humidity range of 30%-70% RH, an operating range of -20℃~45℃ and an ingress rating of IPX5.
Last updated: 6 September 2026
What we found
- Published as DP E180.CAN · IPX5 · -20℃~45℃.
- 7 specifications are published for it, each with the source it was read from.
- No matching recall was found in the records this catalogue holds from 8 regulators.
Assembled from the evidence on this page. Every figure and count below is shown with the source it was read from.
Frame and components
- Assistance levels
- Five levels, lit from the bottom up
- Storage temperature
- -20℃~60℃
- Humidity range Bafang give
- 30%-70% RH
- Ingress protection
- IPX5
- Operating temperature
- -20℃~45℃
“Power assistance indication (level 1 to level 5 is from bottom to top, no LED light means no power assistance)”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP E180-E181-EN.pdf
“Storage temperature: -20℃~60℃”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP E180-E181-EN.pdf
“Bearing humidity: 30%-70% RH”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP E180-E181-EN.pdf
“Waterproof: IPX5”
Source: bafang-e.com/uploaded/manual/BF-DM-C-DP E180-E181-EN.pdf
“Operating temperature: -20℃~45℃”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP E180-E181-EN.pdf
Identity
- Model name as declared
- DP E180.CAN
“Model: DP E180.CAN”
Source: bafang-e.com/uploaded/manual/BF-DM-C-DP E180-E181-EN.pdf
Error codes
- Error code table it publishes
- Bafang's 31-code system table
“ERROR CODE DEFINITION The HMI can show the faults of Pedelec. When a fault is detected, the icon will be indicated and one of the following error codes will be indicated too.”
Source: bafang-e.com/uploaded/manual/BF-UM-C-DP E180-E181-EN.pdf
Models documented with this display
No model has been matched to this display yet in the records we hold. That is a statement about our research, not about which bikes carry it.