The Addmotor 48V 2A/DC/XRL/3 Pin Charger is an e-bike charger with an output of 54.6V and an input rating of 100-240V AC, 50/60Hz, 2A.
Last updated: 31 August 2026
What we found
- Published as 54.6V · 100-240V AC, 50/60Hz, 2A · 3PIN 2.0 DC 2.0 XLR.
- 9 specifications are published for it, each with the source it was read from.
- No matching recall was found in the records this catalogue holds from 8 regulators.
Assembled from the evidence on this page. Every figure and count below is shown with the source it was read from.
Battery and charging
- Input voltage
- 100-240V AC
- Output voltage
- 54.6V
- Output current
- 2A
2.5A
“48V 2.5A DC Charger”
Source: addmotor.com/products/48v-25a-dc-charger
- Input
- 100-240V AC, 50/60Hz, 2A
- Charge indicator
- Green: Charged OK, Red: Charging
- Connector options
- 3PIN 2.0 DC 2.0 XLR
- Variants offered
- 3PIN-2.0
- Mains inlet, shown in the product photograph
- A two-pin figure-of-eight inlet on the body, with a US two-prong mains lead
- Output connector, shown in the product photograph
- A small circular locking connector with a threaded collar, straight
“Input: 100-240V AC, 50/60Hz, 2A Output: 54.6V”
Source: addmotor.com/products/48v-25a-dc-charger
“Output: 54.6V, 2A LED Display: Green: Charged”
Source: addmotor.com/products/48v-25a-dc-charger
Disputed
“AC, 50/60Hz, 2A Output: 54.6V, 2A LED Display”
Source: addmotor.com/products/48v-25a-dc-charger
The same document also states
“Input: 100-240V AC, 50/60Hz, 2A Output: 54.6V, 2A LED Display: Green: Charged OK, Red: Charging”
Source: addmotor.com/products/48v-25a-dc-charger
“LED Display: Green: Charged OK, Red: Charging”
Source: addmotor.com/products/48v-25a-dc-charger
“Port: 3PIN 2.0 DC 2.0 XLR”
Source: addmotor.com/products/48v-25a-dc-charger
“This is the correct charger for the M-560 P7 with a 3-pin charging port. Please select "3PIN-2.0”
Source: addmotor.com/question_p71
Source: addmotor.com/products/48v-25a-dc-charger
Unconfirmed
Source: addmotor.com/u_file/2510/products/13/c48dd769f2.webp
Battery care and safety
- Where it may be used
- For indoor use, or do not expose to rain
“If you are not sure about your E-bike battery's mode, please contact us to confirm. Disconnect the supply before making or breaking the connections. For indoor use, or do not expose to rain.”
Source: addmotor.com/products/48v-25a-dc-charger
Compatibility
- What the manufacturer says it fits
- Motan M-560 P7, 3-pin version
“I've got an m560p7 came with a 3-pin charger. Just want to make sure I get the right one. Answer: This is the correct charger for the M-560 P7 with a 3-pin charging port. Please select “3PIN-2.0”.”
Source: addmotor.com/question_p71
Identity
- Name on the manufacturer's product page
- Sources disagree
48V 2A/DC/XRL/3 Pin Charger
Source: addmotor.com/products/48v-25a-dc-charger
48V 2.5A DC Charger
Source: addmotor.com/products/48v-25a-dc-charger
Compatible batteries
No sourced battery-compatibility evidence is on file for this charger yet.
Vehicles the manufacturer names for this charger
- Addmotor Motan M-560 P7Manufacturer documented
Addmotor, answering an owner on 29 September 2025: "This is the correct charger for the M-560 P7 with a 3-pin charging port. Please select “3PIN-2.0”." SCOPE: this product is sold in 3PIN 2.0, DC 2.0 and XLR versions and only the 3-pin one is confirmed here. The vehicle is discontinued; the charger is still sold.
Sources
- 48V 2A/DC/XRL/3 Pin Charger — customer questions & answersMANUFACTURER SUPPORT PAGE
Source: addmotor.com/question_p71
Retrieved August 29, 2026
- Addmotor customer questions & answers — which charger fits an M-560 P7MANUFACTURER WEBSITE
Source: addmotor.com/question_p71
Verified September 8, 2026